Wood band saw blades, toothed, in coils, i.d. 400 mm, non-set, non-sharpened. Made of  strip steel variation C75S specially adopted for band saw blades. Length of coils supplied per request or in standard 100 m rolls. Widths from 60 mm up to and including 260 mm

we produce meat bone food cutting  band saw blades steel strips with sizes

0.56 x 13mm, 0.56 x 16mm, 056 x 19mm

0.50 x 13mm, 0.50 x 16mm, 050 x 19mm

0.022" x 1/2", 0.022" x 5/8", 0.022" x 3/4"

Thickness tolerance: +/-0.02mm and Width tolerance: +/-0.02mm

Band saw steel strip manufactured by Guangzhou Cgoodsteel Co.,Ltd are widely used in wood cutting saw, cutting tool, stone saw blade, which has good flatness, straightness and high fatigue resistance that can withstand high and continuously changing loads and vibrations. The strips with high tensile strength, has durable cutting edge that do not break.

China premium C75 high carbon steel strip factory for supplying steel material for making band saw blade

The main product 75Cr1 steel strip DIN1.2003, 75Cr1 steel plate, 75Cr1 spring steel sheet, tool steel 75Cr1, 80CrV2 steel strip DIN1.2235, 80CrV2 steel plate, 80CrV2 spring steel sheet, 75Cr1 metal sheet are produced in our factory for heat treating process, including Normalizing , Annealing, Tempering, Quenching, Hardening and tempering.

Material grade: ck50,ck55,ck60,ck67,ck70,ck75, c80, ck95, 60Si2Mn, 50CrV4, 51CrV4

Thickness: 0.15mm-4.0mm

Width: 8mm-300mm

Hardness: below 19HRC

Surface: nature, bright finish

Material grade: ck50,ck55,ck60,ck67,ck70,ck75, c80, ck95, 60Si2Mn, 50CrV4, 51CrV4

Thickness: 0.15mm-4.0mm

manufacturer and exporter of cold rolled and annealed alloy steel, medium carbon steel and high carbon steel strip. These strips are supplied in bright finish & sheared edges suitable for bending & forming and then heat treated for required hardness.

C1050 C1074 C1095 is a high-carbon, cold rolled steel containing approximately more than 0.50% -1.05% carbon that can be annealed or hardened by heat treatment to a maximum hardness of approximately Rockwell C 55. 

We produce spring steel strip for wiper blades use, instead of steel wire, in material grades spring steel ck67,sk5. Usual size is 0.8mm x 7mm and 0.8mm x 14mm in the production lines. Edge is treated with slitting, no burr. During the heat-treatment, the hardness is controlled between 45-50HRC, tolerance +/-2HRC for one coil. Coil type can be ribbon wound or Jumbo wound. We also accept other size if customers require.

We produce spring steel strip for wiper blades use, instead of steel wire, in material grades spring steel ck67,sk5. Usual size is 0.8mm x 7mm and 0.8mm x 14mm in the production lines. Edge is treated with slitting, no burr. During the heat-treatment, the hardness is controlled between 45-50HRC, tolerance +/-2HRC for one coil. Coil type can be ribbon wound or Jumbo wound. We also accept other size if customers require.

We produce spring steel strip for wiper blades use, instead of steel wire, in material grades spring steel ck67,sk5. Usual size is 0.8mm x 7mm and 0.8mm x 14mm in the production lines. Edge is treated with slitting, no burr. During the heat-treatment, the hardness is controlled between 45-50HRC, tolerance +/-2HRC for one coil. Coil type can be ribbon wound or Jumbo wound. We also accept other size if customers require.